Krylon sent me the new Dual Paint to try out. Check out their latest promotion, The Dual Duel, where Krylon is looking to find The Ultimate Restorer. To win this title, enter your spray paint restoration project and encourage friends and family to vote for your project as their favorite for their chance to win too. (Stop by and check out the contest! There are a few Twice Lovely pieces entered there, and I would very much appreciate your vote if you’re so inclined! You can vote once a day, so check back and vote often!)
YOU MIGHT ALSO LIKE:
Being a busy mom of (almost) 4, any steps I can save in the furniture refinishing process are always welcome, so I was very excited to try out Krylon’s new Dual Paint and Primer in One! There was a lot going on with this makeover, so I apologize before hand for the lengthy post. 🙂 I started with a dresser I picked up on my local Craigslist.
It’s a fantastically versatile size and solidly built. What I didn’t love about it was the multitude of faux drawers and excessive pulls. It’s a three drawer dresser that’s trying to look like it has 8! What’s up with that?!?! And 16 pulls for 3 drawers is just a little ridiculous, don’t you think? So I set out to transform this little beaut into a THREE drawer dresser and restore the universe to rights. 🙂
Ahhhh! Much better, doncha think? But first things first! When I get real solid wood pieces like this, I usually try to strip and stain the top. I LOVE the combination of a painted body with a warm, earthy, wood top! If you have never tried stripping and staining wood out of fear (believe me, I used to be scared to death of it too!), I’d like to take some of the mystery and fear out of the process. It really is easy, pretty fast, and terribly rewarding! I always use Citristrip. I find it does a great job without all the toxicity and stinkiness of other chemical strippers. (You’ll notice my bottle was just about empty when I finished this project. I use it a lot.)
You’ll notice, though, it’s a “safer” paint stripper. Still, be sure to wear protective gloves and avoid getting it on your skin or in your eyes. I paint it on thick using a wide, cheap, chip brush. It’ll start doing it’s thing right away. Let it sit for at least 30 minutes, then scrape up all the gunk.
Even with at least 4 or 5 layers of paint on it, I was still able to get the top stripped to bare wood in 3.5 hours (while going about my life.) 😉 So don’t be afraid of this process!! Here’s a little bit how that particular 3.5 hours went:
2:00 – applied stripper 2:30 – removed first layer, reapplied stripper 2:45-4:00 – picked up kids from school 4:15 – removed second layer, reapplied stripper 4:15–5:15 – cleaned up 3 year old’s poop castastrophy, gave the pooper a bath 5:15 – removed last layer, cleaned off remaining paint/stripper with denatured alcohol and fine steel wool, gave a quick sanding with fine sandpaper 5:30 – WE HAVE WOOD! (time to cook dinner)
See? Not so bad. You can do it! Once the top was stripped, I moved on to tackle the issue of turning those faux drawers into single drawers. I accomplished this using moulding, some masonite, wood filler, and (my good friend) Kwik Wood. First, I used my miter box and saw to cut some very small moulding to size and miter the end to 45 degrees.
Just line up your carefully measured edge like this:
Then, I attached the moulding to the fronts of the drawers using wood glue and clamps. (This moulding was so lightweight and small, I didn’t feel the need to tack them on with nails. The wood glue held it on just fine.)
Next, I had my hunky husband use our very-old-and-heavy-but-still-effective circular saw to cut some thin masonite board to size to fit inside the mouliding frame.
The last step in creating the new drawer fronts was to fill in the small gaps that remained on the sides with my trusty JB Weld Kwik Wood. (This stuff is perfect for larger fills and repairs that are just too much for your wood filler to handle.) Just mix up the putty, smoosh it in the gaps, let it dry, and sand to smooth.
Now that I had the body of the dresser ready to go, I started staining the nicely stripped top. I save my boys destroyed and dirty beyond saving socks for just this purpose.
(Gross! That used to be white!) Just put on a glove, slip on the sock, and you’re ready to wipe off your stain!
I wanted to give it a nice, dark walnut stain (my personal fave.) The dresser top had other ideas. 🙂 After the first coat of stain, it barely looked any different.
I’m not sure what was up with it, but I must of given the thing 5 or 6 applications of Dark Walnut stain before I was somewhat happy with the result (and the result certainly wasn’t the Dark Walnut I was looking for.) Oh well! Sometimes the furniture has a mind of it’s own and I can’t break it to my will. 😉 I always get antsy for the wood staining and do it before paint the body of the piece. My trick on keeping the paint off the nicely stained wood top is to turn the piece upside down on the drop cloth. Then I use painters tape over any edges still exposed. The paint away! Always does the trick. Usually, I start with a primer, but since Krylon sent me their new Dual Paint and Primer Spray Paint to try, I got to skip that step and jump right in! For this project, I used High Gloss Piston Gray, and I love the way it turned out!!
I bought these gorgeous, detailed, black cup pulls from an Ebay seller (thehardwarehunter) for less than $2 a piece!! I’ll definitely be shopping with them again!
I heard that the Krylon Dual spray paint is now available at Walmart, so I certainly recommend giving it a try! I did notice the paint stayed tacky for quite a while (much longer than their regular indoor/outdoor spray paint), so make sure you leave it a good long time to set up before handling it or touching it. It feels like it’s going to be a tough finish that will really hold-up though! Happy (spray) painting!
PIN THIS TO SAVE FOR LATER